Product Benefits

  • Aesthetics: reinforced modular appearance
  • Solidity: strength for repeated handling
  • Acoustics: high degree of correction, absorption factor αw up to 1

Related system :
System of metal tiles installed on T grids (H0, H2, H8-E15, H8-E24) [PLAFOMETAL-SC-310]

Caracteristics & Performance

ACOUSTIC ABSORPTION

  • αw up to 0.80 with the ALPHA range
  • αw up to 1 with the ALPHA PLUS range

Check out our video "Acoustic metal ceilings" in our Learning Center.

 

Acoustic filling

  • ALPHA offer: black acoustic fleece bonded to the back of perforated ceilings.
  • ALPHA PLUS offer: encapsulated insulating wool to put on the back of perforated ceilings.

Acoustic performances of ceilings are guaranteed for products defined, controled and entirely delivered by Plafometal.

 

Light reflexion

  • Up to 87%.

Fire reaction

According to EN 13501-1 :

  • Euroclass A1 for the prepainted non-perforated
  • Euroclass A1 for the prepainted in the ALPHA range
  • Euroclass A2-s1, d0 for non-perforated powder post-painted
  • Euroclass A2-s1, d0 for powder post-painted in the ALPHA range
  • Euroclass A2-s1, d0 for the product in the ALPHA PLUS range

Chemical resistance

Our metal ceilings and wall panels have been tested with three types of disinfection chemicals recommended by the World Health Organization against the main viruses, including COVID-19: sodium hypochlorite 2.5%, hydrogen peroxide 6% and ethanol 70%.
Test methods include long or repeated exposures to these chemicals. The results are evaluated according to the standard exposition EN 12720 and the standard disinfection and wet abrasion ISO 11998 (tests carried out with a microfibre cloth).

All metal ceilings are resistant to these three disinfectants. However we recommend some product depending on the use:

  • Sodium hypochlorite 2,5%: OK for all ceilings (no visual change)
  • Hydrogen peroxide 6%: only black powder-coated ceilings show minor visual change ; no visual change on other ceilings
  • Ethanol 70%: only white prepainted and wood finish ceilings show minor visual change ; no visual change on other ceilings

This is valid for all products (steel and aluminum, prepainted and powder coated, with acoustic complement).

Regulations

Environment and health

  • Nos plafonds sont recyclables indéfiniment à 100%.
  • Ils sont pérennes, faciles d'entretien, non générateurs de poussière, particules ou vapeur et sont inertes et inodores.
  • Ils ne favorisent pas de développement microbien et n'émettent pas de COV et formaldéhydes.

CE Marking

  • DoP No.: 0007-200.

Indoor Air Quality

The products are classified:

  • A+ for all the products non-perforated
  • A+ for all the products in the ALPHA range
  • A+ for all the products in the ALPHA PLUS range, with a specific mineral wool pad in this plastic film

Installation & Cleaning

Type of installation

  • Framed installation

Installation (preview)

  • Installation according to DTU 58.1
  • Framed installation : hangers with 1,200-mm centers starting 300 mm from the wall, and carriers with 1,200-mm centers..

Disassembling for access to the plenum

  • By simply lifting the panel in the grid. Please contact us if you are interested in installing an access trapdoor. Possibility of a panel anti-lift feature by adding peripheral CA113 stirrups.

Colors & Dimensions

 

Colors and finishes

  • White 137 (~ RAL 9003) - polyester prepainted.
  • Metallic Grey (RAL 9006) available on request - polyester prepainted.
  • Black (RAL 9005) available on request - polyester prepainted.
  • 180 RAL colors available on request - polyester powder coating.

Perforations on steel

  • Plain    
  • 11% Ø1.5 M
  • 22% Ø1.5 M
  • 10% Ø2.5 M
  • 12% Ø2.5 U (only with perforations that stop short on the four sides)
  • 16% Ø2.5 U (only with perforations that stop short on the four sides)
  • 23% Ø2.5 M
  • 46% 5.5x5.5 U (only in 600*600 mm)
  • 11% 61x4 U (non stored)
Perforations 
H8-E24
H8-E24
H8-E24
H8-E24
H8-E24
H8-E24
H8-E24
H8-E24
H8-E24

 

Module dimensions

  • 600x600, 600x1,200, 675x675, 625x625 mm.
  • Other dimensions on request

Cut outs and integrations

  • Bespoke factory cut-outs on request.

A day-to-day support

At Plafometal, we support our customers on a daily basis through each step of a construction project. Following the whole project, from the building owner’s request to the delivery, we provide our customers with all advice and recommendations they may need.

Read more